;========================================================== ;= use buffer : Address => EEPROM action address buffer ;= example: movlw D'10' 位址10讀出 ;= call EE_READ_A ;= : Address = D'10' ;= : TMP1,TMP2 = data ;=========================================================== ; EE_READ_A: MOVWF ADDRESS EE_READ: MOVLW D'02' MOVWF CNT1 BCF STATUS,C RLF ADDRESS,W BANK_1 MOVWF EEADR ;point to EEPROM EE_READ_LOOP: BANK_1 BSF EECON1,RD ;read data from EEP MOVFW EEDATA ; INCF EEADR,F BANK_0 BTFSC CNT1,1 MOVWF TMP2 BTFSS CNT1,1 MOVWF TMP1 DECFSZ CNT1,F GOTO EE_READ_LOOP RETURN

;================================================================ ;= use buffer : Address => EEPROM action address buffer ;= example: movlw H'55' 位址10寫入0x55 0x55 ;= movwf TMP1 ;= movwf TMP2 ;= movlw D'10' ;= call EE_WRITE_A ;= Address = D'12' ;================================================================ ; MEMORY_WRITE: MOVWF TMP1 CLRF TMP2 MOVLW PWR_MEM EE_WRITE_A: MOVWF ADDRESS EE_WRITE: MOVLW D'02' MOVWF CNT1 BCF STATUS,C RLF ADDRESS,W BANK_1 MOVWF EEADR ;point to EEPROM BANK_0

EE_WRITE_LOOP: MOVFW TMP2 BTFSS CNT1,1 MOVFW TMP1 BANK_1 MOVWF EEDATA BSF EECON1,WREN ;enable write BCF INTCON,GIE MOVLW H'55' MOVWF EECON2 MOVLW H'0AA' MOVWF EECON2 BSF EECON1,WR ;寫入 BANK_0

;------- wait --------------------------

MOVLW D'43' ; +=> wait 100mSec MOVWF DELAY_2 ; / L_WaitLoop: CLRF DELAY_1 ; \ CLRWDT ; | BTFSS PIR1,EEIF ; | GOTO L_WaitLoop_TP ; | BCF PIR1,EEIF ; | BANK_1 ; | BCF EECON1,WREN ; | L_WaitLoop1: INCF EEADR,F ; point to EEPROM BANK_0 ; | DECFSZ CNT1,F GOTO EE_WRITE_LOOP INCF ADDRESS,F RETURN

L_WaitLoop_TP: ; | INCFSZ DELAY_1,F ; | GOTO L_WaitLoop+1 ; | DECFSZ DELAY_2,F ; | GOTO L_WaitLoop ; / GOTO L_WaitLoop1 ;

;下面為清除程序，清除地址為00H----3FH，清除值為0FFH，上面一個(gè)是讀子程序一個(gè)是寫子程序，但在清除中只用寫

;子程序

EEPROM_ERROR: CLRF ADDRESS ; SET EEPROM ADDRESS 0 ERASE_LOOP: MOVLW H'0FF' ; ERASE EEPROM 00-3FH MOVWF TMP1 ; MOVWF TMP2 ; CALL EE_WRITE ; BTFSS ADDRESS,6 ; GOTO ERASE_LOOP ; GOTO RESET ;